INSEL Rectifiers India manufactures high quality and cost-effective bridge rectifiers, which provides full wave rectification from an AC power source for electronic equipment. Our line of bridge rectifiers can complete your electronic equipment's power and case style requirements
Rectifiers An electrical circuit used to convert AC into DC current. A rectifier is a diode that causes the current to flow in only one direction. The output of the rectifier is essentially half-AC current, which is then filtered into DC.
Bridge Rectifiers A bridge rectifier makes use of four diodes in a bridge arrangement to achieve full-wave rectification. This is a widely used configuration, both with individual diodes wired as shown and with single component bridges where the diode bridge is wired internally.
Bridge RectifiersAdvantage The main benefit of bridge rectifiers over conventional full-wave rectifiers is that with a given transformer, the bridge rectifiers generate a voltage output that is nearly twice that of conventional full-wave circuit. Another benefit of bridge rectifiers is the low ratio of peak inverse voltage to average output voltage.
A half-wave rectifier is a circuit that allows only one half-cycle of the AC voltage waveform to be applied to the load, resulting in one non-alternating polarity across it. The resulting DC delivered to the load "pulsates" significantly.
Bridge Rectifiers
NOTE
1-
Fixing
: Center hole Ø 4.7
2-
Fixing
Torque : 4 Nm + 0.5
3-
Terminal
Snap-on .25''
wrap round of solder
4-
Isolation
: Terminal to case
1.5 KV RMS
Bridge
Rectifiers
Moulded Diode Bridge Assembly - Selection Chart
Bridge
Type
DC
output
Current
Repetitive
Peak
Reverse
voltage
SurgeCurrent
& Fusing 10 ms per diode Tj=Tvjmax Sin 1800
